7600 SERIES CHOCOLATE BROWN 7689

(0)No Reviews yet
SKU: INT-7689
DISPLAY NAME: 7689 7600 SERIES CHOCOLATE BROWN

Pour Downs - If larger size is available we will pour down

*Shipments via UPS/FedEx or OUTSIDE of AZ, CO,CA, ID, NM, NV, OR, UT, WA - Have Additional Handling Fees

  • 5 Gal - $34.99 Handling Fee
  • Drum - To be freight quoted
  • QTS and GALS - no additional Handling Fee

Order Grid

Subtotal$0.00

Details

FEATURES

7600 Series Direct Print Plastisol Inks are non-phthalate, high performance colors, formulated for ultra high speed wet-on-wet automatic printing.

7600 Series Inks offer superior performance through fast production speeds, good opacity, and wide range of popular colors.

7600 is well suited for fine detail and halftone printing using finer mesh counts.

SPOT FLASHING

The 7600 Series inks will spot dry, with a very low after flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not totally fused. Total fusing of any flashed color may cause inter-coat adhesion problems with the inks printed on top of the flashed ink. Final fusing or curing should occur in the dryer. 

IMPORTANT INFORMATION

Use an under base print when printing 7600 Series inks onto dark fabrics. Use 711, 7014, 7031 or 7041 white as an under base ink. To achieve a softer hand and faster production speeds, print under base ink through finer mesh counts (230 to 305 t/in or 90 to 120 t/cm mesh).

SKU
TDS
SDS
Brochure
Manual
INT-7689
Not Available
INT-7689 SDS
Not Available
Not Available
Not Available
Not Available
Not Available

Ratings & Reviews

No reviews available

Be the first to Write a Review